 |
New Products |
|
|
Mopars By Crane is proud to introduce the new
"HARNESS PRESERVER KIT:"
- As seen in 'MOPAR MUSCLE MAGAZINE' August 2008 issue: "Voltage Revamp" article.
-
- Harness Preserver Voted #3 Aftermarket Part of the Year by 'MOPAR COLLECTORS GUIDE' Magazine!!
WHY DO I NEED A HARNESS PRESERVER??????????
FIRST REASON:
- Protects engine & instrument harnesses from melting due to high current (especially bulkhead connectors)
- Provides the full alternator output to the battery & aftermarket accessories connected directly to the battery and starter relay.
SECOND REASON:
- Protects the ignition switch & wiring from burning out due to alternator field current demands
- Provides full current to the regulator & alternator field- full alternator output is ensured.
The new Harness Preserver will reduce the electrical stress on your stock engine harness. When the cars were new, alternator output was either 37 or 45 amperes. Whether you have had your alternator rebuilt (most rebuild kits are now at least 59 ampere output) or replaced your alternator with a higher output one, there is now more current trying to go through a harness that was not designed to handle it. If you have added high current draw accessories such as an electric fan, high wattage audio equipment or aftermarket ignition, the Harness Preserver will ensure the full alternator output is available to power them. NOTE- YOUR AMP GAUGE WILL NOT WORK AFTER INSTALLING THE HARNESS PRESERVER KIT BECAUSE MOST OF THE ALTERNATOR OUTPUT HAS BEEN SENT DIRECTLY TO THE BATTERY VIA THE ALTERNATOR CABLE. THIS PROTECTS YOUR BULKHEAD AND UNDER DASH WIRING FROM RECEIVING TOO MUCH JUICE FROM THE ELECTRICAL COMPONENTS UNDER THE HOOD.
Protect your investment- Order your Harness Preserver Kit Today:
- Standard & Upgrade Kits Available
- If you don't see your application listed below- click "Catalog" link to your left for our complete line of Harness Preserver Kits. Parts are listed in the Electrical Category
- Or, if you prefer- call us today to order by phone: (941) 322-1121
|
| |
|
1960-69 A Body Harness Preserver- Standard |
|
 |
|
| $89.00 |
|
| Kit is designed for 1960-69 A Body vehicles with stock engine harnesses, starter relays & voltage regulators in the stock locations & alternators with up to 100 ampere output... |
|
| |
|
1962-70 B Body Harness Preserver- Standard |
|
 |
|
| $89.00 |
|
| Kit is designed for a 1962-70 Mopar B Body with stock harness, starter relay & voltage regulators in the stock locations with alternator with up to 100 ampere output rating.... |
|
| |
|
1970-72 A Body Harness Preserver- Standard |
|
 |
|
| $89.00 |
|
| Kit is designed for a 1970-72 A Body with stock harness, starter relay & voltage regulator in the stock locations with alternators up to 100 ampere output rating. Dart, Dart... |
|
| |
|
1970-74 E Body Harness Preserver- Standard |
|
 |
|
| $99.00 |
|
| Kit is designed for a 1970-74 Mopar E Body with stock harness, starter relay & voltage regulator in the stock location and alternator with up to 100 ampere output rating. |
|
| |
|
1960-69 A Body Upgrade Kit- 100 Amp |
|
 |
|
| $119.00 |
|
| Kit is designed for a 1960-69 Mopar A Body with a stock harness and 1970 and up electronic voltage regulator and dual field alternator up to 100 amp; 69 & down A Bodies running... |
|
| |
|
1962-70 B Body Upgrade Kit- 100 Amp |
|
 |
|
| $119.00 |
|
| Harness Preserver Upgrade Kit for a 1962-70 Mopar B Body with a stock wiring harness and 1970 and up electronic voltage regulator and dual field alternator up to 100 amp. 70... |
|
| |
|
ITEMS FOR SALE |
|
|
The following items are for sale-call for more info: (941) 322-1121
Lots of parts and options available with cars.
- 1965 Plymouth Satellite
- 1970 Dodge Coronet
- SOLD! 1972 Duster
- 1970 Dodge Challenger
- 472 Crate Hemi
- SOLD! 68-70 B Body Strange Dana 60 Rear End Assembly (3.54) New
|
|
